How to Tell If Your Diamonds Are Cracked

The precious gemstones that we buy hold a great deal of importance in our lives. If you did some research prior to purchasing your diamond, it’s likely you have read about the items people do to be able to safeguard their diamond jewelry from chips, breaks, cracks etc. sometimes, however, despite all the protection, your diamonds do get cracked, or seem to get cracked.

In that case, you are most likely on the search for ways to find out if your jewel really is cracked and what could you do to repair it. Like the majority of people, you almost certainly freaked out just a little when you accidentally hit your diamond clad hand hard against the wall. For a short while, you would have been searching for marks or cracks just like the most of us.

Let me assure you by first telling that it is relatively hard for a gemstone to be seriously broken at such an insult. What you may see as a blemish may have nothing in similarity to a crack. Here we will attempt to answer some of the common questions people have about broken diamonds. I’ll also demonstrate how a damaged gemstone actually appears like in order to set all your irrational worries at rest.

Daily Deterioration: Breaks Are Unlikely, While Blemishes Are common

After purchasing their first precious stone rings part and putting on it for a couple weeks, there are a lot of people who get paranoid and start to worry if they had broken their diamond. Have you experienced anything similar as well? from what I have learned from my relationships with viewers and other customers, most people only start realizing details they never found before because that they now have the time to scrutinize over their jewelry. The actual fact that almost all of us don’t examine their jewelry in depth when actually deciding to purchase it, perplexes me.

This is why we often end up finding faults that were originally there at the time of purchase. Naturally, you are far more likely to notice the details when you look at something with leisure. The questions only arise after they viewed their jewelry for an extended time period. Plus they start noticing things like girdle reflections or feather inclusions that have been there all along. Don’t think it’s a tiny bit too late to understand those issues now?

Having said that, more often than not, it’s Only a Cleanliness Issue. People often fault a diamonds to be damaged when they see a whitish looking line running right through the stone. Instead of an actual crack. This is because of the unavoidable issue of having a dirty diamond. The truth is, throughout the span of your day, a gemstone diamond ring worn on your palm will inevitably get in touch with a number of things including, soap, water, your fingertips, dirt and actual mud. Initially, this coating of grime may direct resulting superficial blemishes that appear like a covering of clouds or greasy stains. Over time, some of this grime can become so thick that it actually starts to look like solid white lines. If you see this kind of dirt or grime on any stone, you are sure to mistake it for actual cracks or blemishes.

“Repairing the Splits” – Cleaning the Diamond

Also, as the diamond’s surface becomes dirtier, the natural stone will start looking uninteresting and lifeless. Subsequently, a few of the inclusions which were masked by the stone’s brilliance and sparkle would now be observed easily. This may lead to you thinking that new defects have developed, when in fact, they had been there all along. By cleaning your diamonds and removing a great deal of the grim, you will easily regain the natural stone to its original condition. More often than not, a soft tooth brush plus some detergent solution would be sufficient to complete the job. If your engagement ring has sides that happen to be difficult to access with a brush, you might like to consider using an ultrasonic cleaning device or take it back again to the jeweler for professional vapor cleaning.

You Get What You Paid For: How It Might Really Be Broken

In truth, gemstones are somewhat hard to break. To be able to really cause a crack in the natural stone, you have to use the right amount of power at the right position along its cleavage line to see results. The ability to crack represents a direct relationship between the quality of the precious stone and its own “break-ability”. A diamond with low-quality grade and an unhealthy cut class (crowns that are too shallow or with an extremely slender girdle width) could be more susceptible to ruin when put through external forces.

From the view of the crystalline framework, excessively mixed diamond jewelry have weaker material integrity because of the existence of problems and foreign materials. That is why you always want to check the diamonds carefully prior to making any purchase. Generally speaking, the word “you get what you paid for” applies strongly to the precious stone industry. By paying more for quality, you indirectly buy many years of sturdiness and satisfaction for yourself. This is why many diamond experts recommend buying from renowned diamond retailers and professional dealers.

Get Your House With the Best Sound Proofing Now

Are you worried that your neighbors may complain about sound systems and high sound level of your new house? Well, forget it and be a party freak and get yourself moving to beats of music systems just by getting your new house sound insulated. Your house needs sound testing, which may be separated by equal or different distances from your neighbors. You just need to get an expert solution about sound insulation testing in order to get your house sound proof.

What is sound insulation testing?

In simple words sound insulation testing can be defined as minimum separations between the walls, which is required between walls & floors to meet the requirements as stated by Approved Document E generally termed as ADE by UK government. These tests are carried out to ensure that your building construction demonstrates an acceptable level of airborne and impact sound insulation performance. Pre assessment of construction is done and results are provided for desired construction.

Understanding airborne sound and impact

Airborne sound is a sound that is transmitted through air. This sound may be unacceptable in the nearby locality. Hence there must be well maintained distance between you and your neighborhood, according to ADE rules and regulation. Well, what is impact, then? Have you ever heard or felt the vibration of DJ and other song. These sounds tend to vibrate the walls of your house this is called impact of sound. Your construction must be in accordance with ADE rules for acceptable sound in the neighborhood.

What is Acoustic test and How to do it?

A poor quality construction and workmanship may cause airborne sound travel directly in between door gaps and windows which may result in flanking sound to the outer environment. Though the element itself provides insulation but still then a small sound from gaps may cause an increase in transmission of airborne sound.

The amount of airborne sound can be reduced by using acoustic absorption. This reduces the amount of sound reflected back to space by the surface enclosing it. This acoustic insulation reduces the sound transmitting into space from an adjacent space though a building fabric. This fabric becomes insulation between walls and air to eliminate air gaps for impact and airborne sound.

Procedure of Acoustic testing:

Some key and important procedures are explained below for efficient acoustic testing:

– Installation of all external construction must be done such as doors, windows, vents etc and doors and windows must be closed.

– Internal doors must be kept open

– All electrical fittings such as lights, fans, switches must be done.

– Make sure that accessibility to both sides of testing walls is done.

– For impact testing there must not be any cosmetic floor fitting

– The testing room must be the one where sound boxes are to be kept in future.

Testing:

Airborne sound transmission can be tested by placing a test loud speaker which must be capable of generating sound at a range of frequencies. Detection of the sound is carried out over a microphone. Later calculations are made and adjustments are made to account for sound absorption from receiving space. These tests are carried out from a range of 125 Hz to 4000Hz.

Many advanced technologies are coming up for acoustic testing. Every month reviews of new technology are in the market. Do stay in contact for further review of sound testing across the globe. Sound insulation testing and acoustic test are necessary requirements while constructing buildings and you should contact an engineer to guide you in this.

Home Audio System

So, you are looking for a way to bring the family together more. You want something that will make an impact but, unlike a room makeover, require only minimal amount of work and yet can be enjoyed by everyone. If this sounds familiar, then you aren’t alone. But, what if you could use something unexpected to get the desired results? The answer – a home audio system.

Let’s face, all of us love to watch movies. They are the go to activity for a first date, a way to unwind and spend time living a life away from the hum drum of reality, provide a fun group outing and so much more. But what, if instead of spending money at the theater and sitting in a room of people – most of which you don’t know – you could simply slip away and watch the movie of your choice (not just what is playing locally) in your very own theatre. But, there is more to enjoyed with a home audio system than you may have realized. Here are a few advantages of a home theatre system.

· As stated, watching movies is the primary reason people opt for a home audio system for their home. After all, what’s not to love about choosing the chairs, the seating layout, and most of all, the movie and the showing time from the comfort of your home!

· Having a home audio system is not just about movies, you can also use it to watch sporting events on TV. But, rather than having a seat on the couch, you can “sit” ringside, courtside or feel up close and personal with the players thanks to features such as a high-definition screen and a surround system. Short of having a season’s pass, there’s no better way to enjoy a game.

· Love video games? If you or your family members love gaming, then the big screen and audio system will take it to a whole new level. From single player games to teams, there’s nothing quite like the experience.

While these are some of the more obvious reasons for a home audio system, for many people there are some other great features. These would be the size of the images, the quality of the sound and the assortment of gadgets that are used. For the tech savvy homeowner, there’s just something awesome about having all these elements in one place.

Having a home audio system is the way to enjoy movies, sports and much more in a style that suits you. Don’t settle for a night at a crowded movie theatre, talk to a home audio system professional today and get ready to enjoy movies on the big screen when and where you want them.

Multi-Room Audio

Why Choose a Whole House Audio system? Most people choose to have a whole house system because it allows them to take their music and audio with them regardless of which room they happen to be in at the moment. A whole house system allows you to carry on your life without being plugged into an iPod. You can have conversations with your children, spouse, and guests while listening to the ball game or your favorite tunes. What is on your honey do list for this weekend? You have to clean out the garage. No problem. You can take your music with you. You have to do all of the yard work too? No problem, take the game outside and listen while you work. A whole house system allows you to go about your life and still be able to do the things you want to do like just listening to the ball game.

What are my Choices?

The two big choices are single source systems or multi-source systems. Those can be set up as a wireless audio system or hardwired. The biggest difference is in the quality. The quality of the audio you receive goes up tremendously with professional installation. One consideration is the fact that every room in your home has different audio needs as each room responds differently to sound. A professional will be able to recognize the acoustic requirements of every room in your home.

Features include wall mounted volume dials that allow you to instantly adjust the volume of your audio specifically for that room. Most systems allow you to turn rooms on or off with a remote. No use waking your neighbors up at 3 am when you start to watch Jurassic Park and the outdoor system is streaming dinosaurs fighting. Streaming music is another option with built in iPod docking stations that allow the contents of your iPod to be played over your whole house system or multi-room audio system.

Components:

There is a variety of complete audio packages. These pre-configured systems include speakers, wire, keypads, and everything else you need to set up a multi-room audio system. You can build your own system or allow one of our pros to help you select components that fit your audio needs. Start with an Amp and Keypad package or individual components. From there, you can add in power amplifiers to build a custom sound. Speaker selectors allow you to control which rooms receive audio and when. These allow you to control the overall sound throughout your home. Speakers are another area where choice plays a large part in the quality you receive. A professional installation will allows you to add speakers in your ceiling and even add in-wall units. The type of speakers that you choose makes a difference. Wireless setups allow you to broadcast audio without installing wires. These can afford an advantage to really customizing speaker location. Audio components allow seamless streaming of audio via Cat5 cables.

New Builds and Retrofit

It is obviously easier to install a multi-room audio system during construction, but most of us are not building a new home. That means either using a wireless audio system or installing wires. That is where a professional installer comes in handy. Not only do they understand how to run wires the correct way, they know where wires should go and how to hide them. They can also make sure that all of your components are installed correctly and that all systems are working. They can even give you an overview of how to use the system.

There are a lot of advantages of having a whole house system. The systems range from simple to complex, but the grade of sound should always be professional. When you decide you want home audio choose your components carefully. Working with a professional can make a huge difference in the quality of the audio you receive. Understanding that not every room in your home is going to respond the same way to audio is important. By customizing speaker selection to each room, you gain a huge advantage in the quality of the audio that each room receives. No more popping and crackly connections. As you begin to explore all of your options feel free to ask for our guidance, we are always happy to answer your questions or show you what a component does.

Audio Visual Receiver

So you have settled down to watch the latest big-screen movie on your massive HD/plasma/3-D TV… You grabbed the bag of hot cinnamon caramel popcorn, a cold one to drink, gathered the family and watched the movie. Somehow, the picture and sound quality just wasn’t quite as good as you thought it would be and you realized, that, despite owning an expensive TV, the sound and visual effects just didn’t quite cut it. This is where an audio visual receiver (AV receiver) makes the home cinemas experience a fully immersive and richly satisfying occasion.

An audio receiver functions as the hub of a home theatre system by handling a variety of tasks, such as decoding the signals for surround sound, tuning to radio stations, powering up speakers and switching between audio and video components.

Here are the 5 most important things to look for when choosing the best audio receiver.

1) A High Tech Audio Visual Receiver Or Not…

You may think a cutting edge, high-tech audio receiver is the best thing possible, but stop right there. You need to be able to figure out how to use it! The display panel must be easily navigable so you can enjoy concert hall quality sound and movie quality pictures, rather than the audio receiver gathering dust because you can’t figure out how to turn it on.

A good quality receiver will usually include a graphical interface through which the user can set up and operate the receiver. All the information will be clearly displayed so you can figure out how to navigate and use the unit.

2) Calibration: Is The AV Receiver easy To Calibrate?

If you are a novice, setting up a home entertainment system so that all the components are correctly connected can be tricky, let alone working out whether the components are all functioning correctly.

Most of the best audio receivers make this part a bit easier by offering automatic speaker calibration, allowing the receiver to analyze and automatically adjust the sound of the connected speaker system.

The receiver sends test tones to the speakers and sub woofer, monitoring the sound using a microphone so it can determine speaker size, measures the distance from each speaker to the listener and check whether the components are properly connected.

This technology works for the traditional 2 channel home entertainment system as well as for the surround sound home cinema theatre.

An important note here is, the powerful sound bursts in a high action movie and other special effects can drain the receivers power if it is not a high current power audio visual receiver. A high powered unit will produce the high quality movie sounds better than a similar receiver that doesn’t have high current power, even if it has the same wattage.

3) Is There Airplay Compatibility Available?

These days the best audio receivers will have AirPlay compatibility which is the latest technology allowing users to wirelessly stream music from an iOS device ( Apple) as well as digital apps such as Pandora. This allows you to stream directly to the receiver.

Make sure the version of iPhone, iPad or iPod you own has integrated wireless streaming capabilities before you get a receiver with AirPlay technology.

4) Power: Make It High Wattage

Power isn’t just another word for volume, power is measured in watts. More importantly, it determines an audio receivers ability to reproduce dynamic and detailed sound. A high wattage unit will provide better sound quality over those with less power, even at the lower and medium volumes of the movie.

It’s vital the receiver is powerful enough to accommodate both the speakers that are connected to it and the room where the receiver is located. Depending on the speaker sensitivity, the power needed to match the specific speakers will depend on the number of decibels it puts out per watt of power.

You’ll find that speakers with lower sensitivity will require more power. Make sure you take into account the size of the room. If the room is a large one in which an entertainment system is set up, more power is required.

Another point is take into account on how much power will be needed, is whether you are looking at a home theatre or stereo receiver.

The stereo receiver is a simpler and less expensive unit for music lovers who aren’t necessarily looking for a cinema surround sound experience. A home theatre audiovisual receiver is designed to create a fully immersive, surround sound experience for users to enjoy.

5) Last But Not Least: AV receiver Inputs and Outputs

This is a simple one. The more inputs and outputs the device can accommodate the better. These inputs and outputs are where you connect to the receiver with your TV, gaming system, iPod or speakers. You need to have enough inputs and outputs to handle all your equipment easily, plus a few extra for just in case.

And whilst a good number of inputs and outputs are important, you must make sure they are the right kind. The audio receiver should offer digital connections, providing better video and audio quality than the more dated analogue inputs and outputs. To get the most enjoyment out of your HD equipment it should be connected to a receiver using an HDMI (Hi Definition Multimedia Interface) connection.

Choosing the best audio visual receiver for your home theater cinema experience which will bring you the best of movie and sound enjoyment for years to come is a step to be taken with careful research. Choosing an AV receiver with all the above qualities will ensure you will be happy with your purchase, particularly if you are spending a fairly large amount of money. We have reviewed many of the most popular audio receivers at Best Audio Receivers.

Home Theater Projection Screen

Start with a White wall.
See how your projected image looks without a screen. Any issues? Could it be brighter? Is the size big enough? Is the location good?

2. How close can you sit to the screen?
For complete movie immersion, you need a 30-degree vision range.

Here is a quote from AVS Forum…

“A 30 degree field of vision would not only excite the central portion of the human visual system, but the peripheral vision as well. That gives a much heightened experience of reality to the viewer.”

To achieve this 30-degree field of vision, you should be 1.87 times the screen width (1.63 times the diagonal length of a 16:9 display).

3. A bigger screen is better!
The bigger the screen, the further away from the screen you need to sit. You can sit closer to a big screen if the display technology you are using to project the image has a dense pixel structure. For example, D-ILA or DLP. If you are using an LCD with ‘800×600′ resolution or less, then you will want to sit further away so that you minimize the LCD pixels structure. This will require a larger room. In addition, if you are watching DVDs on a lower resolution projector, then you will need to compensate for the reduced resolution by sitting further away from the screen.

4. Choose the correct Screen Material for your projector.
Forget the marketing and error on the side of safety. So much of a screens performance is hype. It won’t turn a lifeless picture into life-like film. If the white wall showed an enjoyable and watchable picture, than don’t go too far away from those specs.

5. Gain Control.
Each screen will have a gain spec… Matte white will have a gain of 1 while the High Power screen will have a gain of 2.8. Higher gains do exist, but mostly not for home use. The higher the gain, the brighter the picture will appear. However, too much gain and hot-spots will appear in the image. Some screens have gains less than 1.0 that means it will not reflect back all of the images brightness. This can be useful if your image is very bright and you want to increase the effective contrast and shadow detail.

6. Buy a test screen.
If you are thinking of spending thousands on a screen (which you can easily do when purchasing a Stewart screen or other high-end screens), buy an inexpensive pull down screen from a manufacturer for about $100 first and see how you like that image. Choose a screen that comes close to the screen you will purchase. Same size, same gain, and watch it for a month. Also, some fabric shops sell screen material (usually of the standard matte white variety) which can be used as a very inexpensive method to mount a screen temporarily on the wall. This is all in an effort to know what you like or dislike about the standard image and what needs to be improved. Alternatively, maybe you will even learn that you don’t need to spend thousands.

7. Screen format.
If your projector is 4×3 (square, like a standard television) and not 16×9 (like a movie theater screen – wider than it is tall) then you will need to buy a screen that is 4×3 to match the image.

For a home theater projector (’16×9′ projector), you really only have one (maybe if you are lucky two) choice of screen format: 16×9.

If you are one of the few home theater owners that want to use a fixed height or width 2.35:1 screen with an anamorphic lens, then you should consult a professional installer. This is the latest holy grail of home theater. It requires the use of masking the image when not showing a 2.35:1 image and removing the masking when you are. It also allows for the ’16×9’ projector to use full resolution to display the 2.35:1 image. Without the anamorphic lens and a ‘Scale Adjuster’ to scale the image across the full panel, you would see black bars when displaying a 2.35:1 image.

8. Rear projection screen.
A rear projection screen can look terrific – very custom and finished. This usually requires a mirror to fit the projector into a small space and still allow the focal length to remain the same.

If you are thinking of a very widescreen – 10 feet or more – you may want to consider a curved screen. With a very widescreen, the differences between the distance from the lens to the outer edges of the screen and the distance from the lens to the center creates a difference in picture brightness and can distort the image. By curving the screen, the distance to the outer edges and the distance to the middle of the screen are nearly the same and remove the distortion and differences in brightness.

The Best Sound Bars Online For Your HDTV

The HDTV has to be one of the best inventions ever, but most of them come with mediocre speakers. Most people who purchase big flat screens want quality sound when watching movies or sporting events. You could go out and purchase a pricey home theater sound system with a bunch of speaker wires or the simpler option would be to get a sound bar.

This type of speaker is designed to sit in front of your TV and can really wake up the audio when viewing movies, playing video games, or listening to your favorite music. The good news is, you can really get a good one for a decent price. Keep in mind, you don’t have to spend a ton of money to get a great sounding bar.

Let’s take a look at a few things to consider before you go out and purchase your new electronic toy. Make sure you have adequate room for placement of your sound bar. Measure the bar you’re considering buying and measure the location in front of the TV where the bar will be placed.

Make sure the bar you select comes with a sub-woofer. This is a separate speaker that will provide the low frequencies, also known as the bass sound. You’ll be want to get that boom sound when things go boom in your action movie.

Some bars will allow you to connect to Bluetooth enabled devices such as tablets, smart phones, music players and computers. This is a great benefit that you will enjoy in case you have your favorite music stored in your smartphone memory or cases where you would like to stream music live while making use of your laptop. With the Bluetooth feature you will just connect to the bar and it will pair within minutes to whatever device you choose.

I like the these type of speakers because they don’t require a lot of connections and I don’t have to run a bunch of wires which creates clutter.

When you’re shopping around, don’t be overly concerned about price. A higher priced bar doesn’t necessarily equate to better sound. Sometimes you’re just paying for bells and whistles and all you really want is great audio. Some features are great to have but really aren’t necessary. Whatever your budget is, you’ll be able to find a sound bar that will enhance your TV viewing and bring you listening pleasure for years to come.

Home Theatre Design Basics

If you have an extra room in the house or have a special area in the basement you are not using, you may want to consider using the space for a home theater setup. Having a home theater can be expensive but overtime you will see the savings you are getting by being able to watch your favorite movie without having to go to a movie theater. This alone can save you a hundred dollars or so each month.

Before you do your this there is one important thing that you need to do. You need to decide where to place the screen, which could be in the corner of the room, against one wall, or even in the center of the room. It all depends on how large the area is and how many seats you have in the room. You should also make sure that the wires are hidden to avoid anyone tripping over them. For snacks and drinks you could have a small refrigerator and microwave in the room.

Here are some other basics you need to consider when doing a home theater design.

Seating arrangement

This is a very important aspect of the design because they can change the complete style and look of the room along with where the screen will be placed. For the seats you can choose individual chairs, sofas, or a combination of both. Where you place them also matters because you can have seats or sofas that are against the wall or you can also have chairs that recline.

Quality of sound

With your home theater setup you need to check the sound quality or sound system you will be using. The speakers are what makes the difference when listening to the movie. If you want a good quality sound make sure that your acoustics are fixed into place. You cannot enjoy the movie if you have poor sound quality. Make sure that you have good quality speakers. One thing that works well with a home theater is using a surround sound system. This type of system can make you feel as if you are in the middle of the action.

Lighting

This is an integral part of the home theater design. It is better if you opt for dimmed light and while watching the movie you could switch off some of the lights to enhance the colors of the movie. If the lights are off you will be able to see even the minutest details. The room should also not have many windows because the light can penetrate through the windows which can take away from the movie. This is why a basement area makes a good place for a home theater setup.

Analog And Digital TV Antennas

There are numerous shows individuals can watch with their friends and loved ones. However, this joyful activity can be ruined due to poor signal. Because of this, it is important for individuals to know their antennas. Today, the most popular TV aerials individuals see in their neighborhood is the analog. These TV aerials can be used indoors and outdoors depending on your location or signal. But, with the advancements of technology, more and more individuals are replacing their old TV aerials with digital ones. To know more, below are some of the differences between analog and digital antennas.

Frequencies

One of the main differences of analog and digital TV antennas is its frequency. All televisions rely on frequency in order to obtain signals. However, antennas make use of different frequencies to provide you with optimum viewing experience. As of now, TV signals make use of two types of frequencies. The lower frequency is used by old antennas, meanwhile, the higher frequency is used by digital TV antennas.

Picture Quality

Analog and digital antennas also differ in producing pictures for your television. As mentioned above, old antennas make use of lower frequency, which mean frequencies can be interfered that can affect the quality of picture transmitted to your televisions. On the other hand, digital antennas provide better quality since it uses higher frequency which provides better and more stable signal.

Degradation

Another difference of analog and digital TV antennas is the way it degrades on your TV screen. When using old antennas, individuals can still watch shows even with weak signal. However, the quality of the picture can be very poor that causes blurs. On the contrary, when using digital TV aerials, televisions will stop displaying or may turn to black when signals are weak.

Installation

Lastly, these TV aerials also differ in terms of installation. When installing old TV aerials, individuals are required to look for areas that there are no hindrances. Apart from that, antennas must be installed on high areas to receive better signal. As for digital TV antennas, specialists state that installing such device is more complicated since you need to consider numerous factors. For one, individuals need to optimize the antenna’s placement. Next, individuals must orient and optimize the antenna itself.

These are only some of the differences between analog and digital TV antennas individuals need to be aware of to ensure that they can use the right TV aerial which can provide better and clearer shows.

Professionally Installed Home Theater Surround Sound System

Nothing provides an immersive aural treat better than a high-performance digital surround sound system. Ever since home theater packages have been available in the consumer market, they have proved to be a great addition to home entertainment systems.

Often, they are part of a home theater which has been fitted by the end user itself. However, if you’re a beginner when it comes to AV technology, there are chances you may not follow the right guidelines during installation. This improper setup can lead to performance issues and even long-term damages to precious audio and video equipment.

A professionally installed sound system can deliver amazing results even from an entry-level sound system. The extra amount spent on a professional surround sound installation delivers its value in the long run.

Optimum speaker placement

Another mistake which end-users can make is the wrong placement and positioning of the speakers. The surround sound experience can be hampered if speakers aren’t placed the way they are supposed to be. It is quite common to see people with couches pushed back against the wall and the speakers lined up right in front. Wrong speaker placement is the bane of self-guided surround speaker installations.

It is worthwhile to remember that the whole idea of surround sound is to create an environment where you have an immersive soundscape to match the onscreen visuals. AV professionals know the best way to place the speakers, keeping in mind the acoustics of the room. Many professionals also guide you during the entire installation process, ensuring you get the most of your system.

Installation can be complicated

Depending on the size and model of the system you buy, the installation process can be complicated. The out-of-the-box systems may seem simple, however, the actual integration process can have several challenges. There are numerous technical considerations involved while installing a surround sound in a room.

Although many systems have detailed instruction manuals and installation diagrams, we’re all aware that most of us don’t even go through them. Connecting wires between the speakers and different sources can be tricky. Handling these problems may be difficult for a person with little or no technical knowledge about the ins and outs of surround sound installations.

Maintaining signal integrity

A common occurrence many rookies may not be aware of is static interference or hum. Improper wiring or power supply sources can cause interference in your speakers. This interference leads to severe signal degradation. Furthermore, static or unwanted frequency buzzing can damage delicate equipment, especially speaker cones.

The chances of interference are high as there are more than 4 speakers with significantly long cable runs. Any interference in the system can ruin the sound experience. This is where a professional AV installer comes in. They are well-equipped to deal with such challenges and remove any avenues for interference. It is the professional’s job to ensure optimum utilization of the available equipment.

Future assistance

In most cases, a professionally integrated sound system comes with a guarantee or warranty for a period of 6 months to a year. As an end user, you get the privilege and convenience to call your technician should you face any problems with your speaker system. In many ways, this gives you some assurance for the future in the sense that the professionals are accountable for the quality of installation. As it is a paid service, you can only expect the best, no? This offers complete peace of mind in the long run.

These are some of the benefits of having your surround sound system professionally installed. As you spend your hard-earned money on buying a system, it makes a sense to spending a little more and getting a great sounding surround or home theater system of your dreams.